Zrld - HP bh5700 User Manual

zrld

NAME
zrld – ZNYX redirector daemon
SYNOPSIS
zrld [-d <level>] [-p <port>] [-f]
DESCRIPTION
zrld is used for remote management of OA/HA applications. OA/HA applications capable of
remote management include zlc, ztats, zlmd.
zrld only allows requests from hosts listed in /etc/rcZ.d/zrld_trusted_hosts.
OPTIONS
-d <level> Set debug level to <level>
-p <port> Specifies TCP port to listen on. Default port is 7000.
-f Run the daemon in the foreground
EXAMPLES
In the following example, zrld starts a background task that listens on the default port 7000 for
incoming TCP requests and passes along the request to the OA/HA application,
zrld
Once started, you can issue supported commands to the host running zrld from a remote host.
For example, if the host running zrld had an IP address of 10.0.0.42, you could use zlc to
remotely query the status of ports 1 through 5. Remember, the IP address of the switch you are on
must be listed in /etc/rcZ.d/zrld_trusted_hosts on the switch running zrld.
zlc –h 10.0.0.42 zre1..5 query
SEE ALSO
zlc, zlmd, ztats
Ethernet Switch Blade User's Guide release 3.2.2j page 324
Downloaded from www.Manualslib.com manuals search engine