3
T o d i spl ay t he So f t I np u t P a n el i con i n t he sys te m t ra y
6" QuickPanel View Keypad
36
D e t a i l e d O p e r a t i o n
Soft Input Panel
1. In the Control Panel, double-tap Input Panel.
The Input Panel Properties dialog box appears.
2. Select the Allow applications to change the input panel state check box.
3. Select or clear the Show Input Panel in system tray check box.
4. Tap OK.
5. To save the settings, run
The Soft Input Panel provides a standard QWERTY key layout with numeric keys at
the top row as illustrated in the following picture.
Lower Case SIP
Uppercase characters are accessed by pressing the
equivalent to holding down the
key is active while the next key is pressed then reverts back to its unselected state.
The
key does the same thing as
CAP
Backup (see page 16).
key on a conventional keyboard. The
SHIFT
but does not revert to lower case after
SHIFT
key once. This is
SHIFT
SHIFT
GFK-2357A