Table of Contents
Advertisement
SETUP OVERVIEW
The Setup options allow the user to optimize the DVR by adjusting things like camera names, alarm setup, recording schedules and more.
It is extremely important that the DVR is set up correctly for several reasons.
Recording Schedules
Camera Naming
Event Input
Setup Screen Overview
Click the + next OpenEye E-120 Setup Item to expand the menu tree and access the Camera, Record and Sensor Setup Displays. Click on
any additional plus signs to display all options. Many of the setup options are the same in the remote software and in the E120 system.
Click Apply after changing any settings.
Camera Setup
Camera Setup
The Camera Setup display allows the user to define camera names, power on and off cameras and define specific cameras as hidden.
Title - Enter camera name - up to seven characters.
Power ON/OFF - Power ON/OFF individual cameras.
Hidden –On/Off - On will hide the camera from logged out users.
PanTilt Setup
The PanTilt (PTZ) Setup display allows the user to define the appropriate protocol for connected cameras with PTZ capabilities. Since
setup varies between different PTZ cameras; refer to the instructions supplied by the camera's manufacturer to complete setup.
ID – 1 > 255 [Set the PTZ ID]
PROTOCOL –Select a PTZ protocol
Sequence Setup
The Sequence Setup display allows the user to set the parameters for:
Page Dwell Time - 1 > 100 seconds [Set the sequence interval time for full screen on Main Display]
Camera Dwell Time - 1 > 100 seconds [Set the sequence interval time for individual cameras on Main Display]
Camera Selection - 1 > 16 > All [Select cameras to display in Main Display]
44
Increase the amount of pertinent recorded video that is saved on the DVR by optimizing the recording
schedule.
Name each camera so the location can be easily identified and include any other pertinent information
that may be helpful when viewing it on the Video Display Area.
Optimize the type or recording by configuring the system to begin recording or trigger an alarm when a
motion or sensor event occurs.
27717AH
Advertisement
Table of Contents
