Disk Management - OpenEye OE2-E12016 User Manual

E series
Hide thumbs Also See for OE2-E12016:
Table of Contents

Advertisement

DISK MANAGEMENT

Format - Shows installed Hard Disk Drives and the status of other
attached storage devices.
To format a device use the arrow keys to select the appropriate
device and press the ENT key. Select OK to confirm formatting
and press the ENT key.
To refresh the list of connected USB devices select USB Device
Reset and press the ENT key.
Overwrite - Sets options for overwriting data when the Hard Disk Drive
becomes full.
Enable HDD Overwrite to allow the DVR to write over previously
recorded data, starting with the oldest date, when the HDD is full.
If set to Off the DVR will not record any new data once the HDD
becomes full. (Default)
Enable Disk Full Warning for notification when the HDD
becomes full and HDD Overwrite is disabled.
Check - Checks the HDD for errors or failure.
SMART Check - (Self Monitoring Analysis & Reporting Technology)
Enable SMART Check to detect signs of HDD failure.
1.
Select SMART Enable and press the ENT key to Enable or
Disable.
2.
Set a check interval between 1 and 24 hours.
3.
Define a temperature threshold and select Celsius or
Fahrenheit.
NOTE: The recommended upper optimum operating
temperature for the HDD is between 40C and 50C (or 104F to
122F).
4.
Select a warning to be activated when the HDD reaches the
defined threshold.
5.
Select Save and press the ENT key to save settings.
TIP: Select HDD INFORMATION and press the ENT button to view the current HDD, DVD, and USB drive information.
27717AH
HDD MANAGEMENT - FORMAT
TYPE
SIZE
STATUS
HDD1
249GB
REC
DVD-RW
-
-
HDD2
NONE
EMPTY
HDD3
NONE
EMPTY
FORMAT ALL
FORMAT
OVERWRITE
SAVE
CANCEL
HDD MANAGEMENT - OVERWRITE
HDD OVERWRITE
DISK -FULL WARNING
REMAIN TIME
USED SPACE
DISK-FULL ALARM
DISK-FULL BUZZER
DISK-FULL MESSAGE
FORMAT
OVERWRITE
SAVE
CANCEL
HDD MANAGEMENT - SMART
ENABLE SMART
ENABLE
CHECK INTERVAL
1 HOUR
TEMP. THRESH
60 C
SMART WARNING
POPUP
CHECK NOW
HDD INFORMATION
FORMAT
OVERWRITE
SAVE
CANCEL
FORMAT
FORMAT
ERASE
FORMAT
FORMAT
USB RESET
CHECK
SMART
ENABLE
ON
30 MIN
90%
0
OFF
OFF
CHECK
SMART
CHECK
SMART
15

Advertisement

Table of Contents
loading

This manual is also suitable for:

Oe2-e12004Oe2-e12008

Table of Contents