Preparing to use the handset
Removing protective film
Inserting the batteries
Insert the batteries ensuring correct polarity (see figure on left).
◆
Place the cover on the battery compartment about 3 mm down from the latch and
◆
push it up until it clicks into position.
Use only the rechargeable batteries recommended by Siemens on
page 154! Never use conventional batteries (non-rechargeable) or other
W
battery types as this may cause significant damage to health and prop-
erty. For example, the jacket of the battery could be destroyed (hazard-
ous). The phone could also malfunction or be damaged.
Opening the battery compartment
Press on the grooved area of the cover and slide back.
Charging batteries
The charging is indicated in the upper right of the display where the charging status V
flashes:
= Batteries (almost) empty
e Batteries
1
/
i
To register handsets, refer to page 20.
The display is protected by a plastic film.
Please remove the protective film!
charged
3
Preparing to use the handset
V Batteries
2
/
charged
3
U Batt. fully charged
9