Setting Up Rejecting For The Entire Msn Group; Forwarding Calls - Siemens Gigaset C1 User Manual

System settings

Setting up rejecting for the entire MSN group

You can reject an external call not only on your handset, but for all members of an MSN
group. Pressing
REJECT
entire group will no longer be called. Someone using call waiting can also be rejected
during a call. The call is added to the calls list.
By factory default, the function is not activated.
v
s í
s
Settings
~
OK
s
ISDN settings
s
Reject all

Forwarding calls

Forwarding internal calls
Only one forward destination can be selected for internal call
◆
forwarding.
i
Only one single-stage call forwarding is supported: If you are
◆
forwarding to a party who has activated internal call forwarding
himself, this will no longer work. The forwarded call will ring at the
party you forwarded it to.
By factory default, internal call forwarding is deactivated.
Setting up the forwarding destination
v
s í
s
Forward. base
~
OK
s
Forward. dest.
s
Int.11
116
will give the caller a busy signal instead of a ringing tone. The
Open the menu.
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Enter system PIN if required (page 91).
Select the menu item and confirm.
OK
Select the menu item and confirm. (
OK
Open the menu.
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Enter system PIN if required (page 91).
Select the menu item and confirm.
OK
Select internal number, e.g. . Int.11 (
‰
activated)
=
‰
= On).