Text Messages To A Pabx; Errors When Sending And Receiving A Text Message - Siemens Gigaset C1 User Manual

Hide thumbs Also See for Gigaset C1:
Table of Contents

Advertisement

SMS (text messages)
The number of the text message recipient must be stored in the directory
i
together with its area code (prefix) so that it can also be used for sending
text messages.
Text messages
You can only receive a text message when the Calling Line Identification is for-
warded to the extension of the PABX (CLIP).
The CLIP of the phone number of the SMS centre is evaluated in your telephone.
If your phone is connected to a PABX, you may have to prefix the number of the SMS
centre with an access code (this depends on your PABX). You can store the access code
in your base (page 96).
If in doubt, you can test your PABX for example by sending a text message to your own
number and adding the access code before the number of the SMS centre. If you do not
receive the message, send another one, this time without the access code.
When you send messages, your sender number may be sent without your extension
number. The recipient cannot reply to you directly in this case.

Errors when sending and receiving a text message

Errors when sending a text message
Text messages that cannot be sent are assigned an error status e.g. "Error FD" and are
saved in the incoming message list.
The following error codes are displayed:
Error code
Description
E0
Calling Line Identification is permanently deactivated (page 17).
FE
Error occurred during message transfer.
FD
Connection to SMS centre failed.
Text messages cannot be sent or received if the number of an SMS cen-
tre is missing or incorrectly stored. Check that the number of the SMS
centre has been correctly stored.
C2
Wrong recipient phone number.
You can display information about the cause of errors on the screen.
Precondition: You have opened the incoming message list (page 46).
s
s
Error status
OK
50
to a PABX
Scroll to the text message you were unable to send.
Select the menu item and confirm. The cause of the
OK
error appears in the display.
Now press the display key to return to the incoming
message list.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gigaset sl1 colourGigaset c2Gigaset s1 colour

Table of Contents