Siemens Gigaset C1 User Manual page 32

Make a call to the internal user:
either ...
~
or ...
[RRRRRRRRRRRRRRRRRRRRRRRRRR ]
LIST
s
Int.11
[RRRRRRRRRRRRRRRRRRRRRRRRRR ]
BACK
either ...
t s
or ...
[RRRRRRRRRRRRRRRRRRRRRRRRRR ]
CONF.
or ...
Toggling
Precondition: You have established an enquiry call (page 29 and page 30).
There is both an active call (the one established with an enquiry call) and a held call (the
first). You can speak to both callers one at a time.
Use t s to swap between the two callers.
An external party hears the set-up waiting melody in a connection on hold (page 125)
when the connection is on hold internally (page 124). An internal party in a connection
on hold does not hear a waiting melody.
Ending an enquiry call/toggling:
either ...
v
s
End
or ...
a
Enter the number of the internal party you want.
Press the display key.
Select internal number, e.g. Int.11 and confirm.
OK
The connection to the internal party is established.
The internal party dialled is busy:
Press the display key to return to the external party.
The internal party has answered:
Toggle (page 31):
Swap between callers.
Conference call (page 32):
Press the display key to establish conference switch-
ing.
Transfer the call (page 33).
End the call that is currently active:
Open the menu.
Select the menu item and confirm. You return to the
OK
waiting caller.
Press end call key.
The active connection is ended. You will automati-
cally be called again by the person on hold.
Functions during a call
31