Siemens Gigaset C1 User Manual page 25

Making calls
Displaying caller's phone number
Precondition: Calling Line Identification is activated for the caller.
Screen display with CLIP
With Calling Line Identification, the caller's telephone number is displayed on the hand-
set screen. If you have stored an entry for this number in your directory, then that entry
will be displayed instead of the number, e.g. "Anna".
Ð
Ext. call from
0891234567
for private
REJECT RNG OFF
Unavailable is displayed on the screen if the caller's phone number is not identified.
Withholding phone number identification
If you do not wish your phone number to be revealed to the person you are speaking to
You can withhold identification of your phone number specifically for the next call or
else for all calls. If set for all calls, the phone number is withheld from the other caller
both for outgoing calls (CLIR) and for incoming calls (COLR).
Withholding transfer of the phone number only for the next call:
v
s í
s
Call preparat.
s
Temp.withhold
a
After the call, the setting is reset again. Your phone number will be iden-
i
tified to your next caller. When you call the selected phone number from
the last number redial list again, this call is also not anonymous.
Withholding or permitting identification of your phone number for all calls:
By factory default, Withhold no. is not activated.
v
s í
s
Settings
s
ISDN settings
s
Withhold no.
a
24
V
Telephone number or 'Anna'
Receive MSN that is being called
Open the menu.
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Select the menu item and confirm (
OK
Hold down (return to idle status).
Open the menu.
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Select the menu item and confirm (
OK
Hold down (return to idle status).
‰
= activated).
‰
= activated).