Selecting An Answering Machine; Activating/Deactivating The Answering Machine - Siemens Gigaset C1 User Manual

Selecting an answering machine

MENU
s
Voice Mail
s
AM1
~
OK
The list of answering machines AM1 , etc., is also opened if you press and hold the
1
number key . The list only contains the answering machines set to be shown on the
handset. If only one answering machine can be reached via the handset, or only one
answering machine is set to be shown, the list is skipped.
If the answering machine menu has not been opened and instead the message "No AM
allocated" is displayed, then you cannot use the answering machine directly with the
handset (page 52). If necessary, change the assignment of the incoming MSNs
(page 83).

Activating/deactivating the answering machine

Precondition: You have selected an answering machine (page 53).
either ...
s
Activate?
or ...
s
Deactivate?
When the answering machine is activated the remaining memory (in %) is displayed on
the screen.
Which AM mode the answering machine assumes after activation (answer and record
mode or announce only mode) depends on the announcement selected (page 54).
You can only activate an answering machine in answer and record mode if there is
memory still available. If the remaining memory is less than 60 seconds, you will be
prompted to delete old messages. If the remaining memory is less than 10 seconds the
answering machine is started in announce only mode.
If the answering machine assigned to a handset is activated, the
×
the screen. The flashes when a recording is in progress.
Operating the answering machine directly
Open the menu.
Select the menu item and confirm.
OK
If necessary, select answering machine and confirm,
OK
e. g. AM1 .
If AM lock is set (page 66): enter the answering
machine PIN and confirm.
Activate the answering machine:
Select the menu item and confirm.
OK
Deactivate the answering machine:
Select the menu item and confirm.
OK
×
icon is shown on
53