Setting Up The Waiting Melody - Siemens Gigaset C1 User Manual

Initiating a enquiry call see page 29 or page 30.
v
í
s
s
Settings
~
OK
s
ISDN settings
either ...
s
Int. enq. call
or ...
s
Ext. enq. call

Setting up the waiting melody

An external party hears the set waiting melody when the connection is on hold in the
base (internal) (page 124). An external party whose connection is on hold in the tele-
phone exchange (external), and an internal party who is on hold, will not hear a waiting
melody.
The following settings can be chosen:
Internal
Off
By factory default, Internal is activated.
v
s í
s
Settings
~
OK
s
System settings
s
Music on hold
s
Internal
Open the menu.
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Enter system PIN if required (page 91).
Select the menu item and confirm.
OK
Set Int. enq. call:
Select the menu item and confirm (
OK
Ext. enq. call is to be set:
Select the menu item and confirm (
OK
The party on hold hears the waiting melody of the
base.
When the waiting melody is deactivated, a setting
cannot be made.
Open the menu.
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Enter system PIN if required (page 91).
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Select the setting and confirm,
OK
e.g. Internal (
‰
= on).
System settings
‰
= activated).
‰
= activated).
125