Setting Options - Siemens Gigaset C1 User Manual

If your telephone is integrated in a Centrex system, the following performance features
can be used.
Calling Name Identification
(CNI)
Message Waiting Indication
(MWI)
CENTREX call

Setting options

You can switch between the settings Standard dial (factory setting), Auto keypad and
Dial * and #.
Standard dial
Once Standard dial has been activated, * and # are not transmitted during dialling, and
if * and # are entered it is not possible to switch to the keypad.
Auto keypad
Once * or # has been entered, this setting automatically transfers ringing during dialling
to the keypad. This automatic switchover is needed for giving commands to the
exchange or PABX.
Dial * and #
Once Dial * and # has been activated, the * and # characters are transmitted during
dialling as commands to the exchange or PABX.
Regardless of the setting options above, after dialling or during the conversation, the
phone switches automatically to tone dialling (DTMF), for instance for remote control
of an answering machine.
MENU
s
Base Settings
s
Settings
~
OK
s
System settings
s
Spec. function
s
Dial properties
s
Standard dial
Operating when connected to a PABX
When you receive calls from other CENTREX subscrib-
ers, the caller's number and name are displayed on
the screen.
The display key
sets if new calls are present in the calls list. Calling up
the calls list deletes the display key
A CENTREX call is announced acoustically in the same
way as an internal call.
Open the menu.
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Enter system PIN if required (page 78).
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Select the setting and confirm, e. g. Standard dial
OK
‰
( = activated).
Ü
is offered on added-feature hand-
Ü
.
97