Opening Lists With The Message Key - Siemens Gigaset C1 User Manual

To cancel automatic redial, press the display key
i
A call in the meantime deactivates the automatic redial. You must acti-
vate it again afterwards.
Deleting a single phone number or the entire last number redial list
Þ
s v
either ...
s
Delete Entry
a
or ...
s
Delete Calls List

Opening lists with the message key

Providing a new entry is present in the relevant list, you can open the following lists
using the message key f:
1. Incoming SMS message list Textmessage(SMS) (page 63)
2. List of missed calls Missed calls (page 50)
3. Answering machine lists AM1 , AM2 , AM3 (on Gigaset with answering machine,
page 142)
These lists display the calls, messages and text messages belonging to the receive MSN's
assigned to the handset.
As soon as a new entry (calls, messages on an integrated answering machine and/or
SMS) were received in one or more lists, the key f flashes and an advisory tone is
heard.
If the flashing key f is pressed, the following is displayed:
If only one list has new entries, you will see the first new entry in that list.
◆
Open entry: s (Select entry)
If several lists have new entries, those lists are offered for your selection.
◆
Open entry: s (Select list)
If the key f is pressed, and it is not blinking, the following is displayed:
The message No new messages is displayed. Then the list of missed calls are opened.
Open the last number redial list.
Select an entry and open the menu.
Delete a single telephone number:
Select the menu item and confirm.
OK
Long press (back to idle status).
Delete the entire last number redial list:
Select the menu item and confirm.
OK
OK
, s (Select entry)
OK
Using the directory and other lists
or any key.
CANCEL
OK
49