Preparing To Use The Handset; Inserting The Batteries; Charging Batteries - Siemens Gigaset C1 User Manual

Preparing to use the handset

Removing protective film

Inserting the batteries

Insert the batteries ensuring correct polarity (see figure on left).
◆
Place the cover on the battery compartment about 3 mm down from the latch and
◆
push it up until it clicks into position.
Gigaset C2:
Use only the rechargeable batteries recommended by Siemens on
W
page 103! i. e. never use conventional (non-rechargeable) batteries or
other battery types as this may cause significant damage to health and
property. For example, the jacket of the battery could be destroyed (haz-
ardous). The phone could also malfunction or be damaged.
Opening the battery compartment
Press on the ribbed section of the cover and push the cover downwards.

Charging batteries

1. The charging is indicated in the upper right of the display where the charging status
V
flashes:
=
Batteries (almost) flat
e
1
Batteries /
i
To register handsets, refer to page 14.
The display is protected by a plastic film.
Please remove the protective film!
charged
3
Preparing to use the handset
V
2
Batteries / charged
3
U
Batteries fully charged
9