Replacing The Carriage Filter - MIMAKI UJV500-160 Operation Manual

Color
Hide thumbs Also See for UJV500-160:
Table of Contents

Advertisement

Replacing the carriage filter

Replace it once a month.
1
Turn the main power switch OFF.
2
Open the lower right maintenance cover.
(1) Rotate the screws under the lower right
maintenance cover (for three positions) to the
left and remove them.
(2) Hold the bottom of the lower right maintenance
cover and pull it to the front.
(3) While pulling the lower right maintenance
cover downward, remove it.
• If the lower right maintenance cover is hard to
remove, use the supplied screwdriver.
3
Open the upper right maintenance cover.
• Remove the screw indicated with circles in the figure and
remove the cover.
4
Remove the carriage filter cover at the upper of the
carriage.
• Pinch the click of the carriage filter cover and raise the cover.
5
Remove the used carriage filter cover.
4-38
Lower right
maintenance cover
Rotate it left.
Screw
Carriage filter
cover
Upper right
maintenancecover
Claw
Carriage
filter

Advertisement

Table of Contents
loading

Table of Contents