Table of Contents
Advertisement
Chapter 4 Maintenance
6
Mount a new wiper.
7
Switch the maintenance switch to print mode.
8
Tap [Complete] > [Finish] once replacement is complete.
• The wiper usage count is reset.
Carriage Filter Replacement
Check the mist filters and replace if very dirty.
• Switch the maintenance switch to maintenance mode before carrying out maintenance.
1
Remove the carriage filter covers.
• Remove the screws, then remove the filter covers.
• Filters are positioned on the left and right of the carriage.
2
Install new filters.
3
Install the filter covers.
• Left and right of carriage: Fit the tabs on the bottom of the filter cover to the carriage cover, then
secure with screws.
Lug
"Maintenance Switch"(P. 37)
144
Advertisement
Table of Contents
Troubleshooting
