Table of Contents
Advertisement
Maintenance
Maintain the machine regularly or as necessary so that its accuracy will be maintained and it can continue to be
used for a long time.
Precautions for Maintenance
Pay attention to the following items when maintaining this machine.
• When using cleaning solution for maintenance, be sure to wear the supplied glove and protective
glasses.
• Never disassemble the machine.Disassembling it can result in electric shock hazards or damage to
the machine.
Before maintenance, be sure to turn off the power button and main power switch, and unplug the
power cable;otherwise, an unexpected accident may occur.
• Prevent moisture from entering the machine.Moisture inside the machine can cause electric shock
hazards or damage to the machine.
• To ensure stable ink jetting, it is necessary for the machine to eject a small amount of ink (flushing)
regularly when a printing (outputting) operation has not been performed for a long time.
• When the machine is not to be used for a long time, turn off only the power button on the front side,
leave the main power switch at the side turned ON (in the position of | ), and leave the power cable
connected.
• Do not use benzene, thinner, or any chemical agent containing an abrasive.Such materials can
deteriorate or deform the surface of the cover.
• Do not apply a lubricant, etc. to any parts inside the machine. Doing so can cause printing failure.
• Be careful that the cleaning solution, ink, etc. not to stick to the cover because this may cause the
surface of the cover to deteriorate or deform.
About Cleaning Solution
Use the cleaning liquid dedicated for the ink being used.
Type of Ink
UV ink
4-2
Applicable maintenance washings
Washing liquid for maintenance (SPC-0568)
Advertisement
Table of Contents
