Table of Contents
Advertisement
2-5-3 Synchronizing the Internal Timecode Generator
with Playback Timecode
–Timecode Recording during Auto Editing
Set switches and sub LCD menu items
as follows.
INT/EXT: INT
PRESET/REGEN: REGEN
F-RUN/R-RUN: No setting required
(ignored)
TC GENERATOR
INT
PRESET
F-RUN
PB
MENU
EXT
REGEN
R-RUN
PB/EE
SET
Sub LCD menu settings
Item
VITC ON/OFF
(home page)
(ON when recording
VITC)
VITC/LTC/AUTO
(home page)
depending on which
signal you want to
synchronize with
(LTC when set to
AUTO)
DF/NDF (general
settings page)
(ignored)
In automatic editing, timecode is
recorded by using the output of the
internal timecode generator, which has
been synchronized during preroll with
playback timecode read from the tape.
For this reason, regardless of the
actual settings of the INT/EXT and
PRESET/REGEN switches, the unit
operates as if the switches were set to
INT and REGEN.
See setup menu item 610 (page 6-23)
if you do not wish to have the INT/
EXT and PRESET/REGEN settings
fixed during automatic editing.
Setting
Desired position
VITC or LTC,
No setting required
2-17
Preparations
Advertisement
Table of Contents
