CyberData 011113 Operation Manual page 39

Voip indoor intercom with keypad

Hide thumbs Also See for 011113:

Table of Contents

2. On the Button Configuration page

Note

Operations Guide

remote device that you want to contact into a Keypad or Call Button field (in either Speed Dial

Mode or Security Dial Mode).

There is no way to place a point-to-point call in Telephone Dial Mode or Cellphone Dial

Mode. The Intercom can receive point-to-point calls in any mode.

The delayed DTMF functionality is available in the Point-to-Point Mode.

Establishing point-to-point SiP calls may not work with all phones.

Installing the VoIP Indoor Intercom with Keypad

(Figure 2-18

and

930915D

Figure

2), type the IP address of the

CyberData Corporation

Intercom Setup

Table of Contents

Need help?

Do you have a question about the 011113 and is the answer not in the manual?