Configuring Alarm Outputs - Honeywell HRGX45 User Manual

Configuring Alarm Outputs

This section describes how to set the dwell time and handling properties of alarm outputs.
To configure alarm output settings:
1.
2.
3.
4.
Go to Menu > Settings > Alarm > Alarm Output.
Select the alarm output you want to configure from the Alarm Output No. drop-down list.
If you want, in the Alarm Name field, enter a descriptive name for the alarm output.
Next to Dwell Time, set the alarm output dwell time in seconds. Select a value between
5 seconds and 600 seconds (10 minutes) or select Manually Clear.
Note If the alarm output dwell time is set to Manually Clear, you must go to
Menu > Manual > Alarm to clear the alarm. Select the alarm output(s) you
want to clear, and then click Clear (or click Clear All to clear all alarm outputs).
Configuring Alarm Settings | 87
800-16694 - A - 04/2014