Fuser Unit (431), Fuser Lamp (408), Thermistor Assembly (405), Paper Exit Sensor (610) - Panasonic UF-890 Service Manual

2.9 Fuser Unit (431), Fuser Lamp (408), Thermistor Assembly (405), Paper
Exit Sensor (610)
2.9.1 For units manufactured up to November 2001 production (UF-890 Only)
(2)
(3)
(6)
(7)
(8)
(10) Harness 1
Harness 2
(8)
(10) Harness 3
Harness 2
(4) (5)
(6)
(9)
(9)
(1) Remove the Left Side Cover (107)
.
(Refer to 2.3)
(2) Disconnect the Fuser Lamp Harness
Connector.
(3) Disconnect Relay Connector.
(4) 1 Screw (19).
(5) Remove the Ground Strap (653).
(6) 3 Screws (4N).
(7) Remove the Fuser Unit (431).
(For units with original type Fuser Unit,
DZHP006136)
(8) Disconnect 1 Connector.
(9) 1 Screw (36).
(10) Remove the Fuser Lamp Harness 1 (558).
(For units with replacement type Fuser Unit,
DZHP000260)
(8) Disconnect 1 Connector.
(9) Disconnect 1 Connector.
(10) Remove the Fuser Lamp Harness 3 (558).
34