Panasonic UF-890 Service Manual page 163

Code Mode Phase
631 XMT
634 XMT
638 XMT
741 XMT,
Polling
800 Relay
Comm.
815 Conf. RCV
816 Conf.
Polled
825 Conf. RCV
Conf.
Polled
870 MEM XMT
Multi-Copy
880 -
884 -
Information Codes
Description of Problem
A "STOP" button was pressed during
Auto Dialing.
B Redial count over with no response
or busy tone was not detected.
Note: U.S.A. / Canada models will
redial only once if busy tone is not
detected.
Power turned off with applicable
data in memory or during
communication.
Unable to dial
The machine was requested to
relay a document but has no Relay
Hub capability.
Mailbox is full.
The received Polling Password did
not match.
Parameter settings of the remote
station are not properly set.
Memory overflow occurred while
storing documents into memory.
- File Access Error.
- File Access Error.
Power switched off.
Power failure occurred.
Deleted the registered station
name before dialing with Timer
Controlled Communications, etc.
163
Cause