Panasonic UF-890 Service Manual page 293

Facsimile
Hide thumbs Also See for UF-890:
Table of Contents

Advertisement

No.
Parameter
24
PRINT REDUCTION
25
REDUCTION RATIO
26
POLLING PASSWORD
27
POLLED FILE SAVE
28
STAMP AT MEM. XMT
31
INCOMPLETE FILE
SAVE
32
COPY REDUCTION
33
XMT REDUCTION
34
ENERGY SAVER MODE
Continued on the next page.
Setting
Setting
Number
1
Fixed
Selecting print reduction mode.
Fixed: Reduce received document according to setting of
*2
Auto
Auto: Reduce received document according to the length of
70
70%
Selecting fixed print reduction ratio from 70% to 100%. This
parameter functions only when fixed print reduction is selected on
----
----
Fax Parameter No. 24.
100
100%
(----)
Setting a 4-digit password for secured polling.
(See the Operating Instructions)
*1
Invalid
Selecting whether the machine retains the polled document in
memory even after the document is polled once.
2
Valid
1
Invalid
Selecting whether the machine stamps the original documents
when storing the documents into memory.
*2
Valid
(Depending on the Stamp setting on the Control Panel)
*1
Invalid
Selecting whether the machine retains the document in memory if
the document is not successfully transmitted.
2
Valid
1
Manual
Selecting whether the machine performs the copy reduction ratio
automatically or manually.
*2
Auto
Manual : The machine will prompt you for the Zoom ratio (100% to
Auto
1
Invalid
Selecting whether the machine performs reduction when the
transmitting document is wider than the recording paper used at
*2
Valid
the receiving machine.
To reduce the power consumption in standby, select either Energy-
Saver or Sleep mode and specify the Delay Time (1 to 120
minutes) for the machine to enter into the selected mode.
1
Off
The Delay Timer setting is only available in the Energy-Saver or
Sleep Modes.
Off :
2
Energy-Saver
Energy-Saver Mode: Saves energy by consuming less power than
Sleep Mode:
*3
Sleep
293
Comments
Parameter No. 25.
received documents.
70%) when making copies.
: The machine will automatically determine the reduction
ratio according to the length of the original document.
The unit will remain in standby mode and
consume more energy than when in Energy-
Saver or Sleep modes.
when in standby mode by turning off the
Fuser Unit after the specified time.
This is the lowest power state that the
machine enters after the specified time
without actually turning off. (Sleep Mode is
not available when the PDL Printer Driver
Kit is installed)

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Uf-990

Table of Contents