Transmitter Chassis (301), Scanner Assembly (340), Led Array Assembly (333), Verification Stamp Assembly - Panasonic UF-890 Service Manual

2.6 Transmitter Chassis (301), Scanner Assembly (340),
LED Array Assembly (333), Verification Stamp Assembly
(6)
(5)
(4)
(5)
(9)
(2)
Mirror 2
(5)
(2)
(2)
(7)
(8)
(2)
(1)
(1)
Mirror 1
(1) Remove the Front Cover (105), Rear Cover
(108)
(Refer to 2.3)
.
(Refer to 2.5)
(2) Remove all the harnesses from the clamps.
(3) Disconnect Connector CN8 on the FCB PC
Board.
(4) 1 Screw and remove the Front Bracket 2 (136).
(5) 4 Screws (19).
(6) Remove the Transmitter Chassis (301)
Assembly.
(7) Disconnect Connector CN30 on the CCD PC
Board.
(8) 2 Screws (19).
(9) Remove the Scanner Assembly (340).
Note: When reinstalling the CCD Harness,
(1) Separate the CCD Harness (545) from the other
harnesses.
(2) Place the other harnesses into the Harness
Protector Film (556).
Cleaning the Mirror 1 (337), Mirror 2 (338)
Clean the Mirror 1 (337) and Mirror 2 (338) with a
soft cloth, soaked with isopropyl alcohol.
27
and the Control Panel Unit