Panasonic UF-890 Service Manual page 201

5.1.5.2 LCD / LED Test
This test is used to check the LCD and LEDs.
Use the following procedure to initiate the test.
Step
1 Standby
2 Press "FUNCTION" and then "7".
3 Press "MONITOR" four times, then press "*".
4 Press "5".
5 Press "2" and "START".
1) LCDs display as shown at right.
2) All LEDs will light.
6 Press "STOP".
7 Press "STOP" to return to standby.
Operation or Unit Condition
201
LCD Display
FEB-12-2002 15:00
00%
SET MODE (1-6)
ENTER NO. OR
SERVICE MODE
ENTER NO. OR
DIAGNOSTIC (1-3)
1:CCD TEST
2:LCD/LED TEST
* CHECK NOW *
SERVICE MODE
ENTER NO. OR
FEB-12-2002 15:00
00%