Panasonic UF-890 Service Manual page 311

Hide thumbs Also See for UF-890:

Table of Contents

(16) Store the Rear Access Cover for future use by

placing it over the LCU PC Board and secure it

with a silver colored screw as illustrated on the

(17) Connect one end of the Ribbon Cable to the

G3B PC Board and the other end with a ferrite

core to CN50 on the FCB PC Board in the

(18) Align the 2 Hooks at the bottom of the G3 Com-

munication Port Assembly over the metal

frame of the machine, and then secure the

assembly with the 4 screws that came with the

2 screws with washer for the top and 2 silver col-

ored screws for the bottom.

(19) Re-install the Sub Rear Cover.

(20) Re-connect the Power Cord and the Telephone

(21) Re-install the Memory Card Cover.

(22) Turn the Power Switch to the ON (I) position.

Show Quick Links

Table of Contents