Customizing Your Machine - Panasonic UF-890 Service Manual

8.7

Customizing Your Machine

Your facsimile machine has a variety of adjustable Fax Parameters. These parameters, listed in the Parameter
Table, are preset for you and do not need to be changed. If you do want to make a change, read the table carefully.
Some parameters, such as the Resolution, Contrast, and Verification Stamp parameters, can be temporarily
changed by simple key operation just before a transmission is made. When the transmission ends, however, these
parameters return to their preset values (Home position). Other parameters can only be changed by the procedure
described below.
Setting the Fax Parameters
1
FUNCTION
2
4
3
Enter Fax Parameter number from the Parameter Table.
Ex:
4
SET
5
Enter the new setting value.
Ex:
6
SET
To set another parameter, press
3 or press
(see Note 1) (see Note 2)
1. To scroll the Fax Parameters in Step 2 or 4, press
Note:
2. To print out a Fax Parameter List, see the Operating Instructions.
7
SET
0 1 for CONTRAST
for LIGHTER
2
to return to standby.
STOP
to return to step
CLEAR
or .
291
SET MODE (1-6)
∨ ∧
ENTER NO. OR
FAX PARAMETER(01-99)
NO.=❚
FAX PARAMETER(01-99)
NO.=01
01 CONTRAST
1:NORMAL
01 CONTRAST
2:LIGHTER
02 RESOLUTION
1:STANDARD