Panasonic UF-890 Service Manual page 25

(25)
(28)
(26)
(29)
(31)
(32)
(22) 1 Screw (19) and remove the Ground Strap
(24)
(23) Disconnect Connector CN11 on the FCB PC
(24) Remove the Harness from the clamp.
(23)
(25) Remove the Control Panel Unit.
(22)
(26) Remove the Battery Holder (1114) Assembly.
(27) Release 4 Latch Hooks.
(28) Remove the Control Panel Chassis (216).
(27)
(29) Disconnect Connector CN41 on the PNL PC
(30) 15 Screws (7B).
(30)x15
(31) Release two Latch Hooks.
(32) Remove the PNL PC Board (214).
25
(540).
Board.
Board.