Panasonic UF-890 Service Manual page 202

5.1.6 Service Mode 6 (RAM Initialization)
Initializes RAM and restores the Function Parameters to their default values.
Note:
This operation should be performed when the unit is first installed.
Step
1 Standby
2 Press "FUNCTION" and then "7".
3 Press "MONITOR" four times, then press "*".
4 Press "6".
5 Press "/\" or "\/" to select the initialization mode.
(See Note)
6 Press "START".
7 Return to step 3 and press "STOP" to return to standby.
No.
99 SHIPMENT SET (A)
98 SHIPMENT SET (B)
97 FLASH MEMORY
CLEAR
1# MANUFACTURE SET Factory use only. DO NOT USE IN THE FIELD.
16 LBP ERROR LOG
CLEAR
15 LOGO/ID/PSWD
CLEAR
14 ALL JOB CLEAR
13 PROGRAM DIAL
CLEAR
12 ABBR. DIAL CLEAR
11 JOURNAL CLEAR
* PARAMETER
INITIALIZE
Operation or Unit Condition
RAM Initialization Table
Initialize Mode
Deletes all setting information, except parameter num-
ber 80 and 81, then set default values.
Deletes all setting information, except parameter num-
ber 61, 80 and 81, then set default values.
Deletes all information in the Flash Memory.
Clears the Printer Error Log.
Clears the Logo, ID, Polling Password.
Clears all Jobs stored in Flash Memory.
Clears the Program keys.
Clears the One-touch and ABBR. Numbers.
Clears the Journal contents.
Restores the Fax and Function Parameters to default
values.
Description
202
LCD Display
FEB-12-2002 15:00
00%
SET MODE (1-6)
ENTER NO. OR
SERVICE MODE
ENTER NO. OR
* RAM INITIALIZE *
ENTER NO. OR
* RAM INITIALIZE *
LOGO/ID/PSWD CLEAR
LOGO/ID/PSWD CLEAR
* COMPLETED *
FEB-12-2002 15:00
00%