(33)
(36)
(37)
(33) Release Latch Hook.
(34)
(34) Carefully lift the LCD Unit (215).
(35) Disconnect Connector CN42 on the PNL PC
(36) Remove the LCD Unit (215).
(35)
(37) Release 4 Latch Hooks on the back of the LCD
(38)
(38) Remove the LCD Holder (232).
Cleaning the ADF Roller (323), Pre-Feed Roller
(325), Feed Roller (328), Eject Roller (330) and the
Scanner Glass (341)
(1) Open the Control Panel Unit.
(2) Clean the ADF Roller (323), Pre-Feed Roller
26
Board.
Holder.
(325), Feed Roller (328), Eject Roller (330) and
the Scanner Glass (341) with a soft cloth,
soaked with isopropyl alcohol.