Panasonic UF-890 Service Manual page 176

Facsimile
Hide thumbs Also See for UF-890:
Table of Contents

Advertisement

Parameter
No.
(see Note 3)
044 REDIAL COUNT
045 RING DETECT
COUNT
046 ON-HOOK TIME
047 RESPONSE WAIT
048
Not used
049
050 RING DETECT MODE 1 = Normal
051 INTERNATIONAL DT
MODE (For Belgium,
France and Spain ver-
sion only.)
052 PULSE RATE
053
Not used
054
055 BUSY TONE CHECK 1 = Off
056 DIAL TONE CHECK
(Except for USA and
Canada version)
057 DC LOOP CHECK
(Except for USA and
Canada version)
058 COMM.JRNL +IMAGE 1 = Off (without image)
059 CONFIDENTIAL RCV
REPORT
060 VERSION
061 TX/RX/PRT/CPY
COUNTER
062 PRINT COUNTER
063
Not used
~
067
Function Parameter Table
Selections
0 = no redial
~
15 = 15 times
1 = 1 ring
~
9 = 9 rings
0 = 0 sec.
~
90 = 90 sec.
1 = 1 sec.
~
90 = 90 sec.
2 = Rough
1 = Off
2 = On
1 = 10 pps
2 = 20 pps
2 = On
1 = Off
2 = On
1 = Off (will not check)
2 = On (checks)
2 = On (with image)
1 = Off (does not print out)
2 = On (prints out)
Indicates the ROM version.
TX/RX/PRT/CPY
1 = Off
2 = On
176
Function
Selects the redial count from 0 to 15
times in 1 step intervals.
Selects the ring detection count from 1
to 9 rings in 1 ring step intervals.
Selects the on-hook time between
sequential communication calls in
1 second step intervals.
Selects the waiting interval for the
response after completing the dialing.
Selects the quality of ringer detection.
Use if the line signal is out of regulation,
set to "Rough" so that the unit may
detect the ringing signals.
Selects whether to distinguish the 4-digit
international access code prefix.
Selects the dial pulse rate 10/20 pps.
Selects whether to detect the Busy
Tone.
Selects whether to detect dial tone
before dialing the telephone number.
Selects whether the unit checks the DC
Loop during communication.
Selects whether the machine prints the
COMM. Journal with image.
Selects whether the machine prints the
CONFIDENTIAL RCV REPORT.
Displays the transmitted, received, total
printed and copied document count.
Selects whether to print in the Fax
Parameter List, the counter information
that is displayed in the Function Param-
eter No. 61.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Uf-990

Table of Contents