S3
DISPLAY MODULE
S3.1 DISPLAY MODULE OVERVIEW
1) Root menu No.
2) Submenu No.
3) Selected item's number
4) Selected parameter's number
S3.2 ROOT AND SUBMENU SELECTION
This section describes the procedures for selecting the root and submenus.
Root Menu Selection Procedure
• Enter the number of the Root menu to be displayed, then press
• Press
↓ on the setting mode display to switch the root menus in sequence.
Sub Menu Selection Procedure
Press
↓ ENTER on the root menu display.
• Enter the number of the submenu to be displayed, then press
• Press
↓ to switch the submenus in sequence.
Note:
Press
END to return to the mode displays.
BC-3000 • Service Manual • Rev. 1
Chapter S3. Display Modules
↓.
↓.
S3 - 1