ISHIDA BC-300 Service Manual page 60

Chapter S5. Test Mode
2. INITIALIZE DISK (C99-03)
Initialize Disk is used to initialize floppy disks.
CAUTION!
Executing Initialize Disk will delete all floppy disk data.
2.1 Delete file (C99-03-00)
To delete files from the floppy disk, press
DELETE.
To terminate deletion in progress, press any other
key than CHAR DELETE.
2.2 OK to delete? (C99-03-02)
To execute disk initialization, press
DELETE.
To terminate deletion in progress, press any other
key than CHAR DELETE.
2.3 OK to delete? (C99-03-03)
Disk initialization in progress.
2.4 Complete (C99-03-04)
Disk initialization completed.
Note:
If initialization is not successful, "Err" is displayed.
S5 - 16
CHAR
C99-03-00
CHAR
C99-03-02
C99-03-03
C99-03-04 PASS
BC-3000 • Service Manual • Rev. 1