Label Format (C07) - ISHIDA BC-300 Service Manual

Chapter S5. Test Mode
7

Label Format (C07)

This item is used to change the label printing
coordinates.
1. Enter the label format number (1 to 4), then
press PLU.
2. Select X or Y coordinate using
0: X axis, 1: Y axis
3. Select Print Field using
4. Enter the new coordinate value, then press
ENTER.
5. Press PRINT to print a test label.
6. Press END to return to the main Test Menu.
Note:
Refer to Appendix A6 for worksheets of all default label formats.
S5 - 10
→
↓ or ↑ .
NOTES :
• To switch X and Y axis, press
• Reposition graduation is 1 = 0.1mm
Y Axis
Base Points
X = 0
Y = 0
C07-01
0: X AXIS
1: Y AXIS
→.
LABEL
X Axis
BC-3000 • Service Manual • Rev. 1
0 01 0324
PRINT COORDINATE
FIELD