Set Up Sequence - ISHIDA BC-300 Service Manual

Chapter 2. Set Up

2.4 SET UP SEQUENCE

1. Perform RAM clear sequence.
Insert the power plug into an outlet. Referring to Chapter S5 (Test Mode 2: RAM Clear), initialize all the
RAM data.
2. Set print format, label length and sales mode according to user's specifications.
Service manual reference sections:
• Print format setting
• Label length setting
• Sales mode setting
3. Register date and time.
Referring to the programming manual, enter the date and time.
4. Register PLU.
Referring to the programming manual, enter PLU data registration in Registration mode.
5. Perform print test.
Load a roll of labels or receipts, and confirm that printing is correct. Refer to Chapter S5 (Test Mode 3:
Thermal Head).
6. Perform totals clear.
Refer to the operation manual.
7. Back up data.
Back up the registration data on a floppy disk. Refer to Chapter S5 (Test Mode 99: Data Transmission.)
2 - 2
: Chapter S5 (Test Mode7: Label Format)
: Chapter S4 (Setting Mode 1: Label Format)
: Chapter S5 (Test Mode 8: Sales Mode)
BC-3000 • Service Manual • Rev. 1