Set Product Name Display Timer - ISHIDA Uni-3 Technical Manual

1.3.10 Save File to Flash Drive
Note
USB specifications: 8GB or smaller, FAT32 format, USB 3.0
Use the following steps to save files to a flash drive.
1. Remove Speed Key insert page.
2. Insert a flash drive.
3. Enter then press
6000
4. Enter the password 495344 then press
5. Enter then press the
27
6. Press the
Right Arrow
7. Press .
PLU B27-200 SEL USB FOLDER
8. Press the
Down Arrow
9. Press to name folder.
Edit
10. Type in folder name. Press
11. Press then press the
3
12. Enter for Auto or
1
display.
13. Press .
Enter B27-02-04 EXECUTE
14. Press .
Zero 14012-0000 OUTPUT CHECK
15. Press to begin sending file to USB.
Enter
16. Press then press
Enter
17. Remove the flash drive. Scale is ready to resume weighing and labeling.

1.3.11 Set Product Name Display Timer

Use the following steps to set the product name display timer.
1. Remove Speed Key insert page.
2. Enter then press
6000
3. Enter the password 495344 then press
4. Enter then press the
17
5. Enter then press the
4
6. Enter then press
2
7. Enter then press the
2
8. Enter then press the
4
9. Enter then press
3
10. Press Mode three times to exit Setup Mode.
weighing and labeling.
10 Uni-3 Technical Manual
. will display.
Mode B00 SETUP
to enter service level.
PLU
, then press
Down Arrow
then press .
Enter B27-02-01 O/P SELECT
will display.
to select an empty folder.
will display.
InP 0001
.
Enter B27-02 SCALE-TO-USB
.
Down Arrow B27-02-03 MASTER MODE
for Manual send. Press
2
will display.
will display.
14014-0000 COMPLETE
three times to exit Setup Mode.
Mode
. will display.
Mode B00 SETUP
to enter service level.
PLU
then press
Down Arrow
.
Down Arrow B17-01-05 SEG PLU
three times.
Enter B17-01 CALL
, then press
Right Arrow
.
Down Arrow B17-03-07 SEG PLU TIMER
.
Enter B17-03-07 SEG PLU TIMER
B00 SETUP
.
Enter B27-01 USB-TO-SCALE
will display.
will display.
B27-20x USB DATA 0x
will display.
will display.
.
Enter B27-02-03 Master Mode (with selected load choice)
will display when complete.
KEY IN ITEM No.
B00 SETUP
twice.
Enter B17-01-02 OPEN PLU
will display.
will display.
.
Enter B17-03-01 REG TMR
will display.
will display.
will display. Scale is ready to resume
KEY IN ITEM No.
will display.
will display.
will display.
will display.
will display.
will display.
will