Enable Ad (Display) Messages - ISHIDA SR-2000a Quick Setup Instructions Manual

VIII. Enable Ad (Display) Messages:
Although the Advertising (Scrolling) Message are restored by i-View, the settings for which
messages to display and when are not.
1. Press MENU button (Supervisor).
2. Enter Programming Menu: PROGRAMMING button.
Note: The password 9000 may be required.
3. Select AD MSG.
See Screen 12.
4. Enter 1, press left most blank yellow button.
5. Set the Display Method: FLASH or SCROLL.
6. Set the Display Speed: FAST, MID, or SLOW.
7. Set number of times to Repeat (for flashing messages).
8. Repeat for additional message numbers using the next available yellow button.
9. Press MENU, MENU and return to Operation mode.
Note: The message text can be edited as needed:
a. Enter the Message number
b. Press the green EDIT button.
c. Edit the text as needed
Screen 12. Advertising Message Setup - set to display message 1~7
Rev 1, September 2006
Ishida SR-2000a Touch Screen Scale and Printer
Quick Setup Instructions
press the SCROLL No button (top, left)
press RETURN.
16 / 21
SR-2000a Quick Setup