A5. Chinese/Japanese Language Firmware - ISHIDA BC-300 Service Manual

A5 Chinese/Japanese/English Language Firmware
Operation
All operations remain the same as the standard BC-3000 except for the entry of text as described below.
1. Character Sizes available = 3 (large: 24 char. per line max., Chinese, Japanese, and/or English)
2. Chinese/Japanese vs. English characters
Press the BLANK key between NORMAL and REVERSE to switch between Chinese/Japanese and
English character entry.
Chinese/Japanese
- triangle above SAVE is on (default)
- characters are entered as a four digit code (refer to JIS character list, available separately)
English - triangle above SAVE is off
- enter letters and numbers using the standard keyboard
- characters are not shown in the display
Chinese, Japanese, and English characters may be mixed on the same line (except character size
1).
BC-3000 • Service Manual • Rev. 1
2 (small: 24 char. per line max., Chinese, Japanese, and/or English)
1 (ingredient: 48 char. per line, English only)
(Firmware C-0877 & F-0218)
Appendix
Appendix - 9