2
SET UP
2.1 PARTS CHECK
Open the shipping carton and confirm the following:
•
No parts are missing.
•
No parts are damaged.
2.2 INSTALLATION SITE CHECK
Check that the installation site conforms to the following conditions:
•
Site is stable and level.
•
Scale will not be exposed to water or other liquids.
•
Scale will not be exposed to direct sunlight for long periods.
•
Scale will not be exposed to wind or strong vibration.
•
Installation site should be sufficiently spacious.
•
Dedicated, grounded circuit is available.
2.3 ASSEMBLY
Assemble the display components as follows:
1. Thread the display connector cable through the display pole.
2. Attach display pole to the plastic display housing with 2 screws (M4).
3. Connect cables.
4. Attach the display to the main body with 2 screws (M4).
5. Cover the screws with the plastic screw caps.
BC-3000 • Service Manual • Rev. 1
Chapter 2. Set Up
2 - 1