Connect Locally Via Ethernet Socket Of The Gcd-Cp10 Card; Connect Via Pcpro Debug Terminal - NEC UNIVERGE SV9100 System Maintenance Manual

Issue 1.0 UNIVERGE SV9100

Connect locally via Ethernet Socket of the GCD-CP10 card.

Connect to GCD-CP10 Ethernet socket using a crossover cable or via a hub. Set the IP address of your NIC
card within the range of the SV9100 GCD-CP10. The default IP address of the GCD-CP10 is 192.168.0.10 (Sub
Net Mask = 255.255.255.0)

Connect Via PCPro Debug Terminal

Using SV9100 PCPro Debug Terminal or a terminal application (e.g. Hyperterminal, set the connection to
TCP/Winsock).
The Host IP address is set by Program 10-12-01 on the SV9100. The default is 192.168.0.10.
The port number is defined in CMD 10-20-06.
Figure 3-1 SV9100 Ethernet Properties – PCPro or Terminal Application
24 System Maintenance