Table of Contents
Advertisement
4. Press [ENT] to freese the data on the display so it is easy to read and understand.
5. Press [ENT] again to receive data again.
6. View data from a device connected to another data port, press the [ZOOM IN].
12.8
NMEA TREND PAGES
The CP390i* and CPF390i have the following NMEA Trend pages. Trends will be shown for
Depth, Temperature and Speed (DST521 or DST526 must be connected to show speed
through the water) when a STANDARD HORIZON transducer is connected. To show Wind
trend information the CP390i and CPF390i must be connected to the NMEA output of a
external Wind instrument.
The CP390i must be connected to the Optional FF525 50/200kHz Black Box Fish Finder.
To select a NMEA Trend page:
1. Press [MENU], move the ShuttlePoint knob to highlight NMEA DISPLAY and press
[ENT].
2. Move the ShuttlePoint knob to select DEPTH TREND, WIND SPEED TREND, TEMP
TREND or SOG TREND and press [ENT].
CP390i and CPF390i
Figure 12.7a - NMEA Data page
NOTE*
Figure 12.8 - NMEA Display Menu
Page 95
Advertisement
Table of Contents
