Table of Contents
Advertisement
5. Press [CLR] or move the ShuttlePoint knob to the left to exit the menu and show the
Chart page.
If the selected language is not available on cartographic data, English is used.
HOW TO RESET LANGUAGE
If you have accidentally selected a language and are unable to return to the Language Selection
Menu, perform the following procedure:
a. Select the Chart page.
b. Press [MENU] two times, move the Shuttlepoint knob to highlight the first (top) selection in the
menu and press [ENT].
c. Move the Shuttlepoint knob to highlight the LANGUAGE item and press [ENT].
d. A language window will be shown, select your language and press [ENT].
3.6
SELECTING PAGES USING SOFT KEYS
The Soft Keys located under the LCD are used to select the pages quickly without the need
to go into the menu. The default pages are VIDEO, NAV, HIGHWAY, CELESTIAL, CHART
and LIST.
When one of the Soft Keys is pressed popup windows above each Soft Key are shown with
the key description. Press the Soft Key with the desired page description and the GPS Chart
Plotter will change to that page.
3.7
CUSTOMIZING THE SOFT KEYS
The Soft Keys can be individually customized from the default pages (discussed above) to
the following: CHART, DUAL CHART, CHART/COMPASS, CHART/HIGHWAY, NAVIGA-
TION, HIGHWAY, CELESTIAL, GPS STATUS, DSC LOG, DSC DIRECTORY, NMEA
DISPLAY, NMEA DATA, DEPTH TREND, WIND SPEED TREND, TEMP TREND, SOG
TREND, MARKS/WAYPOINTS, USER C-CARD, AIS LIST, FIND, VIDEO INPUT, 50kHz
FULL PAGE, 200kHz FULL PAGE, 50kHz/CHART PAGE or 200kHz/CHART PAGE.
Also when a SI-TEX Radar antenna is connected (USA O
customized to show Radar pages, RADAR FULL, RADAR/CHART, RADAR OVERLAY and
RADAR/FISH FINDER.
Page 36
NOTE
if unable to understand current selected language
Figure 3.6 - Screen display pages
), any Soft Key can be
NLY
CP390i and CPF390i
Advertisement
Table of Contents
