Nmea Trend - Standard Horizon CP590 Owner's Manual

1. Press [MENU], move the ShuttlePoint knob to highlight NMEA DISPLAY and press
[ENT].
2. Move the ShuttlePoint knob to highlight DATA and press [ENT].
3. Connect the BLUE Wire on the GPS Chart Plotter to the junction of the Brown wire and
the VHF wire. The display should look similar to the following picture.
4. Press [ENT] to freeze the data on the display so it is easy to read and understand.
5. Press [ENT] again to receive data again.
6. View data from a device connected to another data port, press the [ZOOM IN].
12.8 NMEA TREND PAGES
When the GPS Chart Plotter is connected to the Optional FF525 (or FF520) 50/200kHz
BLACK BOX FISH FINDER or a Digital Depth Sounder, Wind Speed/Direction, Speed Log
with Temp with NMEA output the GPS Chart Plotter is capable of show Trends in the data
from the device.
To select a NMEA Trend Page:
1. Press [MENU], move the ShuttlePoint knob to highlight NMEA DISPLAY and press
[ENT].
Page 96
Figure 12.7 - NMEA Display menu
Figure 12.7a - NMEA Data page
CP590