Nmea Trend - Standard Horizon CP300i Owner's Manual

2. Move the ShuttlePoint knob to highlight DATA and press [ENT].
3. Connect the BLUE Wire on the GPS Chart Plotter to the junction of the Brown wire and
the VHF wire. The display should look similar to the picture below.
4. Press [ENT] to freeze the data on the display so it is easy to read and understand.
5. Press [ENT] again to receive data again.
6. View data from a device connected to another data Port, press the [ZOOM IN].
12.8 NMEA TREND PAGES
When the GPS Chart Plotter is connected to the optional FF525 50/200kHz Black Box Fish
Finder or a digital Depth Sounder, Wind Speed/Direction, Speed Log with Temp with NMEA
Output the GPS Chart Plotter is capable of show Trends in the data from the device.
To select a NMEA Trend page:
1. Press [MENU], move the ShuttlePoint knob to highlight NMEA DISPLAY and press [ENT].
Page 94
Figure 12.7 - NMEA Display menu on CP300/CP300i
Figure 12.7a - NMEA Data page
Figure 12.8 - NMEA Display menu on CP300/CP300i
GPS Chart Plotters