Table of Contents
Advertisement
4. Press [ENT] ([CLR] to abort the move), the Waypoint appears in the new position.
7.2
MARKS/WAYPOINTS LIST
The MARKS/WPTS List shows all the Marks and Waypoints that have been stored into the
GPS Chart Plotter. This page also allows you to:
ICON
Sorts by icon type. Selections are:
a. SELECT
b. ALL
FIND
Searches through the Marks or Waypoints to find a point by name using the ShuttlePoint knob.
LOCATE
Shows the position of a Mark or Waypoint on the Chart page.
EDIT
Edits a previous stored Mark or Waypoint.
SORT
Sorts the name of User Points. Selections are:
a. A-Z ASCENDING
b. Z-A DESCENDING : sorts the name of the Mark or Waypoint in descending order
NEW MARK
Enters in Marks, editing icon type and position.
MODE
Controls how the Marks or Waypoints are shown on the Chart page. Selections are:
a. SHOW
b. ICON
c. HIDE
d. SHOW ALL
e. ICON ALL
f. HIDE ALL
DELETE
Allows to delete the selected point.
DEL ALL
Allows to delete all stored points.
SEND*
Sends the stored points to a external device (PC) capable of listening to NMEA WPL and RTE sentences.
RECEIVE*
Receives points from an external device (PC) that is capable of sending NMEA WPL sentence.
The SEND and RECEIVE functions are used to receive or transmit User Points (Marks and
Waypoints) to and from a Personal Computer (see also Par. 2.9).
CP390i and CPF390i
Figure 7.1.1a - Moving Mark or Waypoint (2)
: only User Points with the selected icon are shown
: all User Points are shown
: sorts the name of the Mark or Waypoint in ascending order
: icon and name are shown
: only icon (no name) is shown
: Mark or Waypoint is hidden
: all Marks or Waypoints are shown
: all icons are shown without name
: all Marks or Waypoints are hidden
NOTE*
Figure 7.2 - Example of Marks/Waypoints List
Page 63
Advertisement
Table of Contents
