Slave Mode; Sound Control Mode; Static Color Mode; Built-In Programs - SHOWTEC Compact Lightset MKII Product Manual

3. Slave Mode

When the display shows :

4. Sound control Mode

1) Press the MODE button on the device, until the display shows
Compact Lightset will react to the beat of the music.
You can set the sensitivity from low-sensitivity to high-sensitivity between SU.00 - SU.31.

5. Static Color Mode

With this menu you can set the DMX address.
1) Press the MODE button, until the display shows
2) With this menu you can set 3 Static colors of the Compact Lightset.
You can choose Red, Green or Blue by pressing the Setup button.
Use the Up / Down buttons to select the values of each individual color from 000-255.

6. Built-in Programs

1) Press the MODE button on the device, until the display shows
2) With this menu you can set the Built-in Program Mode of the Compact Lightset.
You can choose 14 built-in programs
3) Press Setup to enter the built-in programs Menu. You can choose 2 different sub menus:
See the next page to view the complete menu .
, the device is a slave device. It will now react the same as its master.
14
. Turn on the music and the
.
.
, by using the Up / Down buttons.