Advertisement

Genesis Scan CDM-150
ORDERCODE 40020

Advertisement

Table of Contents
loading

Summary of Contents for SHOWTEC Genesis Scan CDM-150

  • Page 1 Genesis Scan CDM-150 ORDERCODE 40020...
  • Page 2 For more information: iwant@showtec.info You can get some of the best quality, best priced products on the market from Showtec. So next time, turn to Showtec for more great lighting equipment. Always get the best -- with Showtec ! Thank you!
  • Page 3: Table Of Contents

    Showtec Showtec Genesis Scan CDM Product Guide ™ Warning.................…...……………..…………………………….………..….. Safety-instructions………………………………………………………………………………………………………… Operating Determinations.……………………………………………………………………………………………… Rigging.……………………………………………………………………………………………………………………… Description................…...………………………………………….………..…. Features and Overview ………………………………...….……………….………….……………………….………. Backside…………………………………………………...…...….……………….…………………...….……………… Installation................…...…………………………………….………………… Installing the Lamp ............………………………………………..…..……..……….… Lamp Adjustment.…............………………………………………..….………………… Set Up and Operation..............……..…………………………………….………… One Genesis Scan ................……………………………………………….. Multiple Genesis Scan................………………………………………….. DMX-Protocol…...........……………………………………………………………………….… Control Panel….....……........……………………………………………………………….….
  • Page 4: Warning

    WARNING FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL START-UP! Unpacking Instructions Immediately upon receiving this product, carefully unpack the carton and check the contents to ensure that all parts are present, and have been received in good condition. Notify the dealer immediately and retain packing material for inspection if any parts appear damaged from shipping or the carton itself shows signs of mishandling.
  • Page 5: Operating Determinations

    If your Showtec device fails to work properly, discontinue use immediately. Pack the unit securely (preferably in the original packing material), and return it to your Showtec dealer for service.
  • Page 6: Rigging

    Rigging Please follow the European and national guidelines concerning rigging, trussing and all other safety issues. Do not attempt the installation yourself ! Always let the installation be carried out by an authorized dealer ! Procedure: If the projector is lowered from the ceiling or high joists, professional trussing systems have to be used.
  • Page 7: Description

    Description of the device Features The Showtec Genesis Scan CDM-150 is a light effect with high output and great effects. • Standalone mode • Digital menu system • Compact lightweight housing • 1 Color-wheel with coloured glass • DMX-control via standard DMX-controller •...
  • Page 8: Installation

    Installation Installing the Lamp The Showtec Genesis Scan uses the CDM 150 (ordercode 80964, 80965, 80974, 80975) bulb as manufactured by all popular manufacturers. Use only the appropriate lamp for your unit. Note that, product versions that use other lamps, may be offered in the future. Check your product specification label for information.
  • Page 9: Lamp Adjustment

    Lamp Adjustment You can adjust the lamp’s position by turning the screws C (closer/further to the reflector) and B (left/right to center the lamp to the gobo-wheel). The lamp position is set in the factory. As the lamps, which can be used, differ from manufacturer to manufacturer, it can be necessary to readjust the position.
  • Page 10: Set Up And Operation

    Set Up and Operation Follow the directions below, as they pertain to your preferred operation mode. Before plugging the unit in, always make sure that the power supply matches the product specification voltage. Do not attempt to operate a 120V specification product on 230V power, or vice versa. One Genesis Scan 1.
  • Page 11: Dmx-Protocol

    DMX Protocol Channel 1 - Horizontal movement (Pan) Push the slider up, in order to move head horizontally (PAN). Gradual head adjustment from one end of the slider to the other (0-255, 128-center). The mirror can be turned by 180°and stopped at any position you wish. Channel 2 - Vertical movement (Tilt) Push the slider, up in order to move head vertically (TILT).
  • Page 12 Channel 5 – Color-wheel Linear color change following the movement of the slider. In this way you can stop the color-wheel in any position – also between two colors creating double-colored beams. Between 223 - 255, the color-wheel rotates continuously the so-called “Rainbow” effect. Open / White 10-20 Dark red...
  • Page 13: Control Panel

    Control Panel When the indicator light is on, means the Genesis Scan is working Fig. 6 A. LED D. [MODE] Button B. Display E. Up Button C. [ENTER] Button F. Down Button Control Mode The fixtures are individually addressed on a data-link and connected to the controller. The fixtures respond to the DMX signal from the controller.
  • Page 14: Stand-Alone Mode

    Stand-alone Mode The fixtures on a data-link are not connected to the controller, but can execute pre-set programs, which can be different for every fixture. To set the program to be played, stand-alone operation can be applied to a single fixture (the fixture may be set to the master/slave mode or controller mode) or to multiple fixture operating synchronously.
  • Page 15 Addressing With this menu you can set the DMX address or address a fixture as a master/slave. - DMX addressing 1) Press , until the display shows 2) Press to confirm, the display will show (with actually stored address). And press to select the required address , press to confirm.
  • Page 16 - Playing program This function allows you to run a built -in program. Press , until the display shows If the display shows (with actually stored address). Press , the display shows Press to play the program. the display shows , ( with actually stored address ).
  • Page 17: Maintenance

    3. Mechanically moving parts like axles, eyes and others may not show any traces of wearing. 4. The electric power supply cables must not show any damages or material fatigue. The Showtec Genesis Scan requires almost no maintenance. However, you should keep the unit clean. Otherwise, the fixture’s light-output will be significantly reduced.
  • Page 18: Troubleshooting

    Troubleshooting No Light This troubleshooting guide is meant to help solve simple problems. If a problem occurs, carry out the steps below in sequence until a solution is found. Once the unit operates properly, do not carry out following steps. If the light effect does not operate properly, refer servicing to a technician.
  • Page 19 Problem Probable cause(s) Remedy One or more No power to the fixture · Check that power is switched on fixtures are and cables are plugged in. completely dead. Primary fuse blown. · Replace fuse. Fixtures reset The controller is not connected. ·...
  • Page 20: Product Specifications

    Product Specification Model: Showtec Genesis Scan Voltage: 240V-50Hz (CE) Fuse: 5A / 250V Dimensions: 660x330x340mm (LxWxH) Weight: 11 kg Operation and Programming Signal pin OUT: pin 1 earth, pin 2 (-), pin 3 (+) Set Up and Addressing: LED control panel...

Table of Contents