Reports Menu; Network Setup Page - Lexmark 280 User Manual

Menu item
Portrait Height
3–14.17 inches
76–360 mm
Feed Direction
Short Edge
Long Edge

Reports menu

Reports menu
Menu item
Menu Settings Page
Device Statistics

Network Setup Page

Network <x> Setup Page
Description
Sets the portrait height
Notes:
If the height exceeds the maximum, then the printer uses the
•
maximum height allowed.
14 inches is the US factory default setting. Inches can be increased in
•
0.01-inch increments.
356 mm is the international factory default setting. Millimeters can
•
be increased in 1-mm increments.
Specifies the feed direction
Notes:
Short Edge is the factory default setting.
•
Long Edge appears only if the longest edge is shorter than the
•
maximum width supported in the tray.
Description
Prints a report containing information about paper loaded into trays, installed
memory, the total page count, alarms, timeouts, the printer control panel
language, the TCP/IP address, the status of supplies, the status of the network
connection, and other information
Note: The page prints when this item is selected.
Prints a report containing printer statistics such as supply information and
details about printed pages
Note: The page prints when this item is selected.
Prints a report containing information about the network printer settings, such
as the TCP/IP address information
Notes:
This menu item appears only for network printers or printers connected to
•
print servers.
The page prints when this item is selected.
•
Prints a report containing information about the network printer settings, such
as the TCP/IP address information
Notes:
This selection is available when more than one network option is installed.
•
This menu item appears only for network printers or printers connected to
•
print servers.
The page prints when this item is selected.
•
Understanding printer menus
102