Additional Printer Setup; Installing Internal Options; Available Internal Options - Lexmark 280 User Manual

Additional printer setup

Installing internal options

CAUTION—SHOCK HAZARD: If you are installing memory or option cards sometime after setting up the printer,
then turn the printer off and unplug the power cord from the wall outlet before continuing. If you have any other
devices attached to the printer, then turn them off as well, and unplug any cables going to the printer.
You can customize your printer connectivity and memory capacity by adding optional cards. The instructions in this
section explain how to install the available cards; you can also use them to locate a card for removal.

Available internal options

Memory cards
•
Printer memory
–
Flash memory
–
Fonts
–
Firmware cards
•
Bar Code
–
TM
PrintCryption
–
Printer hard disk
•
TM
Lexmark Internal Solutions Ports (ISP)
•
RS-232-C Serial ISP
–
Parallel 1284-B ISP
–
TM
MarkNet N8150 802.11 b/g/n Wireless ISP
–
MarkNet N8130 10/100 Fiber ISP
–
MarkNet N8120 10/100/1000 Ethernet ISP
–
Additional printer setup
17