Short Paper - Lexmark 280 User Manual

Waiting
The printer has received data to print, but is waiting for an End-of-Job command, a Form Feed command, or additional
data.
Press to print the contents of the buffer.
•
Cancel the current print job.
•
31 Missing or defective <color> cartridge
The specified toner cartridge is either missing or not functioning properly.
Remove the specified toner cartridge, and then reinstall it.
•
Remove the specified toner cartridge, and then install a new one.
•
32 Replace unsupported <color> cartridge
Remove the specified toner cartridge, and then install a supported one.
34 Incorrect paper type, check <src>
Load the appropriate paper or other specialty media in the proper tray.
•
Check tray length and width guides, and make sure the paper is properly loaded in the tray.
•
Check the Print Properties settings to make sure the print job is requesting the correct paper size and type.
•
Check that the paper size is correctly set. For example, if the Multipurpose Tray Size is set to Universal, make sure
•
the paper is large enough for the data being printed.
Cancel the current print job.
•
34 Incorrect paper size, check <src>
Load the appropriate paper or other specialty media in the proper tray.
•
Press the down arrow button until Continue appears, and then press
•
job using a different paper tray.
Check tray length and width guides, and make sure the paper is properly loaded in the tray.
•
Check the Print Properties settings to make sure the print job is requesting the correct paper size and type.
•
Check that the paper size is correctly set. For example, if the Multipurpose Tray Size is set to Universal, make sure
•
the paper is large enough for the data being printed.
Cancel the current print job.
•

34 Short paper

Try one or more of the following:
Load the appropriate paper in the tray.
•
Press the down arrow button until Continue appears, and then press
•
job using a different paper tray.
Check the tray length and width guides, and make sure the paper is properly loaded in the tray.
•
Check the Print Properties settings to make sure the print job is requesting the correct paper size and type.
•
Understanding printer messages
150
to clear the message and print the
to clear the message and print the